Pneumatic tapping machine is driven by compressed air, safe and fast and efficient; less air pressure and gas volume (0.3-0.8mpa), super large torque output; can tap on various steel, iron, copper, aluminum, plastic and other materials; Entrained overload protection device, less wire attack damage, high precision of screw thread; simple and light operation, no need for experience and strength; processing cost is much lower than using CNC machining center, milling machine with tapper or manual tapping; The work object does not need positioning device or movement, the working area is very large (with a radius of 100-2000mm); the positioning speed is fast and the cutting speed is high, the production volume is increased; the through hole or the blind hole, the wire tapping is not broken, vertical, ( Universal) can tap the angle; the processing range is large: (M3-M24). Product, life guarantee.
The pneumatic tapping machine is equipped with a precision torsion collet, and the collet itself has an overload protection device. The torsion collet adopts the principle of the automobile clutch. Even if it is a blind hole, there is no need to worry about twisting the wire tapping, effectively controlling the torsion force, ensuring that the tap is not easily broken or damaged; the precision of the screw is 7 or above, and the through hole No broken teeth or bad teeth appear when blind holes are tapped.
