Hey there! I'm a supplier of plastic gear pumps, and over the years, I've seen my fair share of these pumps fail. It can be really frustrating for both me and my customers when that happens. So, I thought I'd share some insights on what causes a plastic gear pump to fail.
1. Wear and Tear
One of the most common reasons for plastic gear pump failure is plain old wear and tear. Just like any other mechanical device, plastic gear pumps have moving parts that rub against each other. Over time, this friction can cause the gears, bearings, and other components to wear down.
The gears in a plastic gear pump are constantly meshing and rotating. As they do, they experience a lot of stress. If the pump is running for long hours or at high speeds, the wear on the gears can be accelerated. Eventually, the teeth on the gears may start to wear away, which can lead to a loss of pumping efficiency. The pump may not be able to generate the same amount of pressure or flow as it used to, and it may even start to make strange noises.
Bearings are another component that can be affected by wear and tear. They support the shafts of the gears and allow them to rotate smoothly. But if the bearings are not properly lubricated or if they are subjected to excessive loads, they can wear out. When the bearings wear out, the shafts can become misaligned, which can cause further damage to the gears and other parts of the pump.
2. Chemical Compatibility Issues
Plastic gear pumps are often used to handle various chemicals. However, not all plastics are compatible with all chemicals. If the plastic material of the pump is not resistant to the chemical being pumped, it can start to degrade.
For example, some chemicals may react with the plastic, causing it to swell, crack, or dissolve. This can lead to leaks in the pump, as well as a loss of structural integrity. The gears may become distorted, and the pump may no longer function properly.
When selecting a plastic gear pump for a specific chemical application, it's crucial to choose the right type of plastic. We offer a range of pumps made from different plastic materials to ensure chemical compatibility. For instance, our Sulfonic Acid Composite Material Pump is designed to handle sulfonic acid and other corrosive chemicals.
3. Overheating
Overheating can also cause a plastic gear pump to fail. When the pump runs, it generates heat due to the friction between the moving parts. If the heat is not dissipated properly, it can build up and cause the plastic components to soften or melt.
There are several reasons why a pump may overheat. One common cause is improper lubrication. Lubrication helps to reduce friction and dissipate heat. If there is not enough lubricant or if the lubricant is contaminated, the friction will increase, and more heat will be generated.
Another reason for overheating could be a blockage in the pump or the piping system. When there is a blockage, the pump has to work harder to maintain the flow, which can lead to increased heat generation. Additionally, running the pump at a higher pressure or flow rate than it is designed for can also cause overheating.
4. Cavitation
Cavitation is a phenomenon that can occur in pumps when the pressure of the liquid drops below its vapor pressure. When this happens, vapor bubbles form in the liquid. These bubbles then collapse when they move to an area of higher pressure, creating shock waves that can damage the pump components.
In a plastic gear pump, cavitation can cause the gears and other parts to erode. The shock waves from the collapsing bubbles can chip away at the plastic surface, leading to pitting and roughness. This can not only reduce the efficiency of the pump but also shorten its lifespan.
Cavitation can be caused by several factors, such as a clogged inlet, a high suction lift, or a pump running at too high a speed. To prevent cavitation, it's important to ensure that the pump is properly installed and operated within its specified parameters.
5. Improper Installation
Improper installation is another major cause of plastic gear pump failure. If the pump is not installed correctly, it can be subjected to excessive stress, misalignment, or vibration.
For example, if the pump is not properly aligned with the motor or the piping system, it can cause the shafts to bend or the gears to wear unevenly. This can lead to premature failure of the pump. Additionally, if the pump is not securely mounted, it can vibrate during operation, which can also damage the components.
When installing a plastic gear pump, it's important to follow the manufacturer's instructions carefully. Make sure that the pump is aligned correctly, the connections are tight, and the mounting is secure.


6. Contamination
Contamination of the liquid being pumped can also cause problems for a plastic gear pump. If the liquid contains solid particles, such as dirt, sand, or metal shavings, these particles can act as abrasives and wear down the gears and other components.
The particles can get trapped between the gears, causing them to jam or wear unevenly. They can also scratch the surfaces of the pump, which can lead to leaks and a loss of efficiency. To prevent contamination, it's important to use proper filtration systems to remove any solid particles from the liquid before it enters the pump.
7. Electrical Issues (for Electrically Driven Pumps)
If the plastic gear pump is electrically driven, electrical issues can also cause it to fail. Problems with the motor, such as a short circuit, a broken wire, or a malfunctioning controller, can prevent the pump from running properly.
Overloading the motor can also cause it to overheat and fail. This can happen if the pump is trying to handle a load that is too large for its capacity. It's important to make sure that the motor is properly sized for the pump and that the electrical system is in good working condition.
Conclusion
As you can see, there are several factors that can cause a plastic gear pump to fail. By understanding these causes, you can take steps to prevent pump failure and ensure that your pump operates efficiently and reliably.
At our company, we're committed to providing high - quality plastic gear pumps and helping our customers with their pumping needs. We offer a wide range of pumps, including the Composite Material Gear Metering Pump For Various Hardening Agents and the Chemical Gear Pump, to meet different applications.
If you're in the market for a plastic gear pump or if you're experiencing problems with your existing pump, don't hesitate to contact us. We can help you select the right pump for your needs, provide installation and maintenance advice, and offer support in case of any issues. Let's work together to ensure that your pumping system runs smoothly!
References
- "Pump Handbook" by Igor J. Karassik et al.
- "Chemical Resistance of Plastics" by various industry sources.
- Manufacturer's documentation for plastic gear pumps.






