Jun 13, 2025Leave a message

Which is better, an internal or external Rotary Gear Pump?

When it comes to choosing the right rotary gear pump for your specific application, one of the most common questions that arises is whether an internal or external rotary gear pump is better. As a supplier of a wide range of rotary gear pumps, including the Special Stainless Steel Metering Pump For Resin Sand Mixer, Epoxy Resin Gear Metering Extrusion Pump, and CAM Rotor Pump, I have witnessed firsthand the unique advantages and limitations of each type. In this blog post, I will delve into the key differences between internal and external rotary gear pumps to help you make an informed decision.

How Rotary Gear Pumps Work

Before we compare internal and external rotary gear pumps, it's essential to understand the basic working principle of rotary gear pumps. These pumps operate on the principle of positive displacement, which means they trap a fixed amount of fluid between the gears and the pump housing and then transfer it from the inlet to the outlet. The gears mesh together to create a seal, preventing the fluid from flowing back to the inlet side. As the gears rotate, they create a vacuum at the inlet, drawing fluid into the pump, and then force the fluid out through the outlet.

External Rotary Gear Pumps

External rotary gear pumps are one of the most widely used types of positive displacement pumps. They consist of two identical gears, typically made of metal or plastic, that rotate in opposite directions within a close-fitting housing. One gear is the driving gear, which is connected to the pump shaft and is powered by a motor, while the other gear is the driven gear, which is rotated by the driving gear through the meshing of the teeth.

Epoxy Resin Gear Metering Extrusion PumpEpoxy Resin Gear Metering Extrusion Pump

Advantages of External Rotary Gear Pumps

  1. High Efficiency: External rotary gear pumps are known for their high volumetric efficiency, which means they can deliver a consistent flow rate over a wide range of pressures. This makes them suitable for applications that require precise metering or high-pressure pumping.
  2. Simple Design: These pumps have a relatively simple design with fewer moving parts compared to other types of pumps. This simplicity makes them easy to install, operate, and maintain, reducing the overall cost of ownership.
  3. Versatility: External rotary gear pumps can handle a wide variety of fluids, including thin and viscous liquids, as well as fluids with suspended solids. They are commonly used in industries such as chemical processing, food and beverage, pharmaceuticals, and oil and gas.
  4. High Pressure Capability: External rotary gear pumps can generate high pressures, making them suitable for applications that require high-pressure pumping, such as hydraulic systems and fuel injection systems.

Disadvantages of External Rotary Gear Pumps

  1. Limited Viscosity Range: While external rotary gear pumps can handle a wide range of viscosities, they are less effective at pumping very high-viscosity fluids. As the viscosity of the fluid increases, the pump's efficiency decreases, and it may require more power to operate.
  2. Sensitivity to Contaminants: These pumps are sensitive to contaminants in the fluid, such as dirt, debris, and abrasive particles. Contaminants can cause wear and damage to the gears and the pump housing, reducing the pump's performance and lifespan.
  3. Noise and Vibration: External rotary gear pumps can generate significant noise and vibration during operation, especially at high speeds or pressures. This can be a concern in applications where noise and vibration are not acceptable, such as in some industrial or residential settings.

Internal Rotary Gear Pumps

Internal rotary gear pumps, also known as gerotor pumps, consist of an outer rotor and an inner rotor. The outer rotor has one more tooth than the inner rotor and rotates around the inner rotor within a close-fitting housing. As the rotors rotate, they create a series of expanding and contracting chambers that trap and transfer the fluid from the inlet to the outlet.

Advantages of Internal Rotary Gear Pumps

  1. Smooth Operation: Internal rotary gear pumps offer smooth and quiet operation, making them suitable for applications where noise and vibration are a concern. The design of the rotors reduces the pulsation of the fluid flow, resulting in a more consistent and uniform flow rate.
  2. High Viscosity Handling: These pumps are particularly well-suited for pumping high-viscosity fluids, such as oils, greases, and polymers. The design of the rotors allows them to handle viscous fluids more effectively than external rotary gear pumps, with less risk of slippage or cavitation.
  3. Self-Priming: Internal rotary gear pumps are self-priming, which means they can draw fluid into the pump without the need for external priming devices. This makes them easy to install and operate, especially in applications where the pump is located above the fluid level.
  4. Low Shear: Internal rotary gear pumps generate low shear forces on the fluid, which is beneficial for applications that require gentle handling of the fluid, such as in the food and beverage industry or the pharmaceutical industry.

Disadvantages of Internal Rotary Gear Pumps

  1. Lower Pressure Capability: Compared to external rotary gear pumps, internal rotary gear pumps generally have a lower pressure capability. They are typically used in applications that require lower pressures, such as lubrication systems and low-pressure hydraulic systems.
  2. Limited Flow Range: Internal rotary gear pumps have a relatively limited flow range compared to external rotary gear pumps. They are better suited for applications that require a relatively low to moderate flow rate.
  3. Higher Cost: Internal rotary gear pumps are often more expensive than external rotary gear pumps due to their more complex design and the need for precision manufacturing.

Which One is Better?

The choice between an internal and external rotary gear pump depends on several factors, including the specific application requirements, the type of fluid being pumped, the required flow rate and pressure, and the budget. Here are some general guidelines to help you make the right decision:

  • If you need high-pressure pumping and precise metering: External rotary gear pumps are a better choice. They offer high efficiency and can handle a wide range of pressures, making them suitable for applications such as hydraulic systems, fuel injection systems, and chemical processing.
  • If you need to pump high-viscosity fluids and require smooth operation: Internal rotary gear pumps are the preferred option. They are designed to handle viscous fluids effectively and offer smooth and quiet operation, making them ideal for applications in the food and beverage industry, the pharmaceutical industry, and the oil and gas industry.
  • If you have a limited budget and need a simple and reliable pump: External rotary gear pumps are a more cost-effective choice. They have a simple design with fewer moving parts, making them easy to install, operate, and maintain.

Conclusion

In conclusion, both internal and external rotary gear pumps have their own unique advantages and limitations. The choice between the two depends on the specific requirements of your application. As a supplier of rotary gear pumps, we offer a wide range of internal and external rotary gear pumps to meet the diverse needs of our customers. Whether you need a pump for high-pressure pumping, high-viscosity fluids, or smooth and quiet operation, we can help you find the right solution.

If you are interested in learning more about our rotary gear pumps or need assistance in selecting the right pump for your application, please feel free to contact us. Our team of experts is ready to provide you with detailed information and support to help you make an informed decision. We look forward to the opportunity to work with you and meet your pumping needs.

References

  1. Karassik, I. J., Messina, J. P., Cooper, P. T., & Heald, C. C. (2008). Pump Handbook. McGraw-Hill.
  2. Daugherty, R. L., Franzini, J. B., & Finnemore, E. J. (2001). Fluid Mechanics with Engineering Applications. McGraw-Hill.
  3. Cameron Hydraulic Data. (2005). Ingersoll Rand.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry