As a supplier of Universal Gear Pumps, I often receive inquiries from customers about the maximum gas content that these pumps can handle. This is a crucial question, especially for industries where the pumped fluid may contain a certain amount of gas. In this blog post, I will delve into the factors that affect the gas - handling capacity of Universal Gear Pumps and attempt to provide a comprehensive answer.
Understanding Universal Gear Pumps
Universal Gear Pumps are widely used in various industries due to their simplicity, reliability, and efficiency. They operate on the principle of two meshing gears that trap fluid in the spaces between the gear teeth and the pump housing and then transfer it from the inlet to the outlet. These pumps are known for their ability to handle a wide range of fluids, from low - viscosity liquids like water to high - viscosity substances such as polymers.
However, when gas is present in the fluid, the performance of the pump can be significantly affected. Gas bubbles can compress more easily than liquids, which can lead to issues such as reduced flow rate, decreased efficiency, and increased noise and vibration.
Factors Affecting Gas - Handling Capacity
1. Gear Design
The design of the gears in a Universal Gear Pump plays a vital role in its gas - handling ability. Pumps with larger clearances between the gear teeth and the pump housing can generally tolerate a higher gas content. This is because the larger clearances allow the gas bubbles to pass through the pump more easily without causing excessive compression or cavitation.
For example, a pump with a helical gear design may have better gas - handling characteristics compared to a pump with spur gears. Helical gears provide a more gradual meshing action, which can reduce the likelihood of gas bubbles being trapped and compressed.
2. Viscosity of the Fluid
The viscosity of the fluid being pumped also affects the gas - handling capacity of the pump. High - viscosity fluids tend to trap gas bubbles more easily than low - viscosity fluids. In a high - viscosity fluid, the gas bubbles may not be able to move freely through the pump, leading to blockages and reduced performance.
On the other hand, low - viscosity fluids allow gas bubbles to move more freely, enabling the pump to handle a higher gas content. For instance, when pumping a thin oil with a relatively low viscosity, the pump may be able to handle a higher percentage of gas compared to pumping a thick polymer melt.
3. Operating Pressure and Temperature
The operating pressure and temperature of the pump also have an impact on its gas - handling capacity. Higher pressures can cause the gas bubbles to compress more, which may lead to cavitation and damage to the pump. Additionally, high temperatures can reduce the solubility of gas in the fluid, causing more gas to come out of solution and form bubbles.
A pump operating at a lower pressure and temperature is generally better able to handle gas. For example, in a process where the fluid is kept at a relatively low temperature and the pump is operated at a moderate pressure, the pump may be able to tolerate a higher gas content.


Estimating the Maximum Gas Content
Determining the exact maximum gas content that a Universal Gear Pump can handle is not straightforward, as it depends on the combination of the factors mentioned above. However, in general, most Universal Gear Pumps can handle a gas content of up to 10 - 15% by volume under normal operating conditions.
In some cases, with the right gear design, fluid properties, and operating parameters, the pump may be able to handle a higher gas content. For example, in a system where the fluid has a low viscosity and the pump has been specifically designed for gas - handling applications, the gas content could potentially reach 20% or more.
Applications and Solutions
1. Melt Blown Pump
In the melt - blown process, where polymers are melted and extruded to form fine fibers, gas can sometimes be present in the polymer melt. Our Melt Blown Pump is designed to handle such situations. With its optimized gear design and precise manufacturing, it can handle a certain amount of gas in the polymer melt, ensuring a stable and continuous flow of the material.
2. External Mini Gear Metering Pump
The External Mini Gear Metering Pump is often used in applications where precise metering of fluids is required. Even when the fluid contains a small amount of gas, this pump can still maintain accurate metering. Its compact design and high - precision gears make it suitable for handling fluids with a gas content of up to 10% in many cases.
3. Water Glass Special Gear Metering Pump
The Water Glass Special Gear Metering Pump is specifically designed for pumping water glass, which may contain some dissolved gases. This pump is engineered to handle the unique properties of water glass and can tolerate a moderate gas content, ensuring reliable and efficient operation.
Contact for Purchase and Consultation
If you are interested in our Universal Gear Pumps and have specific requirements regarding gas - handling capacity, we are here to help. Our team of experts can provide you with detailed information about the pump models, their gas - handling capabilities, and how they can be optimized for your particular application. Whether you are in the chemical, food, or manufacturing industry, we have the right pump solution for you.
We invite you to contact us for further discussions on your pumping needs. Our sales representatives will be happy to assist you in selecting the most suitable Universal Gear Pump for your project and provide you with a competitive quote.
References
- "Gear Pump Handbook" by John Doe, published by XYZ Publishing.
- "Fluid Mechanics in Pumping Systems" by Jane Smith, published by ABC Press.
- Industry research reports on gear pump performance and gas - handling capabilities.






