High Temperature Bottom Reactor Gear Metering Pump
video

High Temperature Bottom Reactor Gear Metering Pump

melt pumps are mainly used to transport high temperature and high viscosity materials in the reactor. The large suction diameter design can be directly connected to the bottom of the reaction kettle, which can make high-viscosity materials more easily sucked by the gear pump. It has the characteristics of strong self-priming, high-voltage output, and steady flow.
Send Inquiry
Product Introduction

The high temperature bottom reactor gear pump (reactor melt discharge pump) is a positive displacement metering pump designed for direct mounting on the bottom flange of vacuum reactors. It solves common problems such as unstable gravity feeding, flow break-off under vacuum and excessive residual material inside the kettle. It performs forced feeding, pressure boosting and precise dosing for polymerization, short path molecular distillation and resin production lines

 

It is equipped with jacket or electric heating for high temperature service up to 350~400°C. Large suction flange provides reliable self-priming under high vacuum (-0.09 MPa). Wetted parts options: SS316L, alloy steel, MoC, Hastelloy. High-temperature combined seal and cooled mechanical seal prevent leakage, air ingress and resin carbonization.

 

Key Features

Strong vacuum self-priming, stable feeding under devolatilization vacuum, high draining rate to reduce material loss

Integrated heating system, uniform temperature control, avoid solidification and thermal degradation of melt

Linear flow vs speed, low pulsation, consistent dosing for pelletizing, coating and batching

Compact bottom-mounted design, universal joint for thermal compensation, suitable for new & retrofitted reactors

 

Application Media

Epoxy resin, cardanol, PI casting solution, PU prepolymer, PP / PE / PBT / PLA melt, hot melt adhesive, phenolic resin, polymer intermediates

 

Application Fields

Vacuum polymerization reactor discharge, short path molecular distillation, resin synthesis, biodegradable polymer production, spinning raw material, hot melt adhesive line, polymer devolatilization, new material pilot plant

reactor gear pumps

FAQ

Q: Can this pump be used with a vacuum vessel?
A: Yes. It is specifically designed for vacuum devolatilization processes, capable of stable, self-priming discharge under negative pressures ranging from -0.05 to -0.09 MPa, without the risk of flow interruption or air intake.


Q: What is the maximum temperature resistance?
A: The standard model handles temperatures up to 350°C, while a customized high-temperature version can reach 400°C. Materials and heating configurations are selected based on the specific medium and process requirements.


Q: Can it be installed directly at the bottom of an existing reaction vessel?
A: Flange dimensions can be customized, and the unit includes a universal coupling to compensate for thermal expansion, making it suitable for retrofitting existing production lines.

 

Hot Tags: high temperature bottom reactor gear metering pump, China, manufacturers, suppliers, price, gear pump for aerospace heat retention, gear pump for geothermal heat retention, heat retaining gear pump, temperature controlled gear pump in water treatment plants, temperature stable gear pump, thermally insulated gear pump for power generation

Send Inquiry

whatsapp

Phone

E-mail

Inquiry