Cast Iron Hydraulic Synchronous Gear Flow Dividers

UK is a manufacturer specializing in the production of hydraulic synchronous gear flow divider. It has a professional design and production team. The accuracy of the synchronous motor reaches more than 98%, and it can achieve 12-cylinder synchronization. It has been well received in the industry at home and abroad!

The difference between hydraulic synchronous gear flow divider and synchronous valve:

1. Hydraulic synchronous gear flow divider is mainly synchronized with respect to the mechanical position, and the shunt collecting valve maintains pressure synchronization.

   Diverting and collecting valve, also known as: synchronization valve, is an independent hydraulic device that integrates the functions of hydraulic diverting valve and collecting valve. It is the general name for diverter valve, collector valve, one-way diverter valve, one-way collector valve and proportional diverter valve in hydraulic valves. Synchronization valves are mainly used in dual-cylinder synchronous control hydraulic systems. It will be more trouble some to install more than two cylinders, and the cumulative error will become relatively high, and the synchronization accuracy will be much worse. There are usually many applications for realizing the synchronous movement of dual cylinders. The diverter and collector valve-synchronous valve has the advantages of simple structure, low cost and easy manufacturing. For some situations where synchronization accuracy is not high, synchronization valves can be selected when two cylinders are synchronized.

2. The hydraulic synchronous motor is an actuator of the hydraulic system. It converts the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and rotational speed) of its output shaft. It has stronger anti-eccentric load resistance. The synchronous gear flow divider can eliminate accumulated errors. Compared with two oil cylinders or more than two oil cylinders, the precision of multi-cylinder synchronous movement is higher. Because it is made of ductile iron, its stability and wear resistance are more reliable, and the installation is also more convenient and reliable.

If your working conditions require high synchronization accuracy, please directly choose UK hydraulic synchronous gear flow divider.

Working Principle
The cast iron synchronous flow divider motor receives high-pressure oil through a common inlet channel. The equal-displacement gear sets evenly distribute the flow to each independent outlet port, thereby driving multiple actuators such as hydraulic cylinders and motors to achieve synchronous motion. By adjusting the geometric displacement differences of the gear sets, the output flow ratio of each outlet port can be precisely adjusted to meet different control requirements.

RFQ:

1. Q: What does a synchronization accuracy of ≤0.5% mean? Is it achievable in practical use?
A: A synchronization accuracy of ≤0.5% means that during the movement of multiple actuators, the maximum deviation in position or speed does not exceed 0.5% of the total travel/total rotational speed. For example, in the case of three hydraulic cylinders lifting synchronously, if the total lifting height is 1000mm, the maximum deviation would not exceed 5mm.

2. Q: Can the number of oil outlets be customized? What is the maximum number of outlets supported?
A: Yes, it can be customized. Standard models have 2, 3, or 4 outlets, and customized models can support up to 12 outlets. However, the more outlets there are, the higher the processing precision required for the internal gear set of the motor. We recommend choosing based on actual needs to avoid increased costs due to over-customization.

Hot Tags: cast iron hydraulic synchronous gear flow dividers, China, manufacturers, suppliers, price, Hydraulic Flow Divider, Gear Flow Divider, Rotary Gear Hydraulic Flow Divider, Synchronous Hydraulic Shunt Valve, Pneumatic Flow Divider, Hydraulic Gear Flow Divider