Cast Iron Gear Flow Divider Without Relief Valve

Cast Iron Gear Flow Divider Without Relief Valve
Cast Iron Gear Flow Divider Without Relief Valve
Cast Iron Gear Flow Divider Without Relief Valve
Cast Iron Gear Flow Divider Without Relief Valve
Cast Iron Gear Flow Divider Without Relief Valve

Cast Iron Gear Flow Divider Without Relief Valve

A cast iron synchronous flow divider is a key component used in hydraulic systems. Its main function is to distribute the hydraulic fluid output from the hydraulic pump to multiple actuators in a specific proportion, thereby achieving synchronous movement of these actuators.

Send Inquiry

Product Introduction

‌Cast iron synchronous flow dividers typically consist of a cast iron housing, gears, shafts, bearings, and other components. The cast iron housing possesses excellent strength and wear resistance, enabling it to withstand high pressures.

The main function of the cast iron flow divider is to combine multiple hydraulic pumps in a hydraulic system and apply it to a multi-circuit hydraulic system. ‌

the cast iron flow divider divides the input oil into several equal or proportional outputs through a series of gear pairs.

The working pressure of each output can be different, and each output can be equipped with a safety relief valve.

This design enables the cast iron flow divider to distribute flow to multiple oil circuits in a certain proportion when a single pump is used for oil supply, and can further increase the pressure value when the pressure needs to be higher than the working pressure of the pump.‌

Cast Iron Gear Flow Divider Without Relief Valve