Knowledge

Gear pump sometimes encounters heat in the equipment during operation and cannot work normally.

The gear pump uses high-speed grinding technology to repair the hydraulic pump and hydraulic motor. It can improve the machining efficiency by 30-40 times and reduce the abrasive c

When we use the gear pump, we can't avoid the wear of the gear pump, so there are many problems, so we have to learn the most common repair technology for the gear pump.

As the population grows and the economy develops, energy issues are receiving increasing attention. Especially in China, energy conservation is becoming more and more important.

The repair knowledge of the gear pump is followed by the improvement of the use of time. The gear pump will present a lack of pump oil or even oil.

The wear of the shaft in the gear pump is mainly due to the frictional wear between the two ends of the shaft and the supporting needle, which makes the shaft diameter smaller.

The gear pump is suitable for various industries and has a wide range of media.

The inter-tooth groove of the end cap and gear constitutes a number of fixed sealed working chambers and can only be used as a dosing pump.

The pump body is equipped with a safety valve. When the discharge pressure exceeds the specified pressure, the conveying liquid can automatically open the safety valve to return th

The gear pump is driven by a separate motor that effectively blocks upstream pressure pulsations and flow fluctuations. The pressure pulsation at the outlet of the gear pump can be

For fluids with varying viscosities or densities in the process, such pumps are not affected too much. If there is a damper, such as a strainer or a limiter on the side of the disc

The concept of a gear pump is very simple, that is, its most basic form is that two identically sized gears are mutually in a tightly fitting housing.