Gear Flow Divider Without Relief Valve And One-way Filling Valve

Gear Flow Divider Without Relief Valve And One-way Filling Valve
Gear Flow Divider Without Relief Valve And One-way Filling Valve
Gear Flow Divider Without Relief Valve And One-way Filling Valve
Gear Flow Divider Without Relief Valve And One-way Filling Valve
Gear Flow Divider Without Relief Valve And One-way Filling Valve

Gear Flow Divider Without Relief Valve And One-way Filling Valve

gear flow divider with small single turn displacement without relief valve and one-way filling valve

Send Inquiry

Product Introduction

The hydraulic gear flow divider motor (referred to as a "synchronous flow divider" or "gear flow divider") is a purely mechanical hydraulic flow distribution component. Its function is to precisely and proportionally distribute pressurized oil from a single inlet to multiple outlets, thereby driving multiple hydraulic cylinders or motors to achieve strictly synchronized motion.

According to the flow rate, there are mainly four series: UD, UW, UL and UG.

Gear Flow Divider Without Relief Valve And One-way Filling Valve

‌1. Strong corrosion resistance‌: Cast iron material has good corrosion resistance and is suitable for various corrosive environments‌
2. High mechanical strength‌: Cast iron flow dividers have high mechanical strength and can withstand high pressures
3. Easy installation‌: Cast iron flow dividers are usually threaded, and the installation process is simple and quick

Typical Application
1. Lifting Platforms & Scissor Lifts: Multi-cylinder synchronous lifting.
2. Bridge Jacking & Tunnel Thrusting: Multi-point synchronous jacking.
3. Bending Machines & Shearing Machines: Slider dual-cylinder synchronization.
4. Metallurgical Equipment & Rolling Mills: Multi-roll synchronous control.
5. Construction Machinery, Pile Drivers & Shield Machines: Multi-actuator synchronization.
6. Injection Molding Machines & Die-casting Machines: Mold clamping and ejection synchronization.
7. Hydraulic Gates & Hoisting Mechanisms: Dual-cylinder synchronization.

gear flow divider -3

Selection Criteria
1. Number of Outlets: 2, 3, 4, 6, 8, 10, or 12.
2. Displacement per Outlet: 1.5 – 200 mL/rev (determines flow rate).
3. Rated Pressure: 22 – 25 MPa.
4. Peak Pressure: Up to 28 MPa.
5. Speed Range: 800 – 3000 rpm.
6. Material: Housing typically made of ductile iron.

Hot Tags: gear flow divider without relief valve and one-way filling valve, China, manufacturers, suppliers, price, Gear Flow Divider Hydraulic, Gear Motor Type Hydraulic Flow Divider, Flow Divider Valve, Hydraulic Flow Divider Valve, Rotary Gear Flow Dividers, Rotary Hydraulic Gear Flow Divider

Pilot Operated Hydraulic Gear Flow Divider

best selling products hydraulic gear flow divider