High Quality 6 Groups Gear Flow Divider

This cast-iron gear-type synchronous flow divider motor is a six-section unit designed for mechanical forced synchronization. It features a high-strength cast-iron housing and six internal gear motor sections sharing a single rigid drive shaft. It accepts a single hydraulic oil input and distributes the flow equally into six output lines to drive six hydraulic cylinders or motors, enabling synchronous lifting, leveling, and jacking operations.

Relying on mechanical forced synchronization via a common shaft, the unit is minimally affected by pressure differentials across the output loads. Each outlet can be equipped with an integrated relief valve and make-up check valve to address issues such as cylinder load imbalance, overloading, and cavitation during the return stroke; this makes it suitable for demanding heavy-duty applications involving six cylinders, high vibration, and significant shock loads. It supports standard equal flow division and offers customizable flow distribution ratios across the six channels.

Features

1. High‑rigidity cast iron housing, minimal housing deformation under high pressure up to 280bar, keep stable synchronization accuracy for multi‑section units.

2. Excellent vibration‑damping performance, lower noise at low‑speed operation, resist shock & cyclic pressure impact.

3. Compatible with mineral oil, water‑glycol fire‑resistant hydraulic fluid, suitable for marine and metallurgy hydraulic systems.

4. Good anti‑fatigue performance, resistant to harsh working conditions: mining, heavy‑duty construction, bridge jacking.

5. Perfect for multi‑section versions (4‑6‑8‑12 sections), maintain good coaxiality for long multi‑unit assembly.

6. Optional built‑in relief valve & anti‑cavitation check valve for each outlet port.

7. Thread / flange port optional, equal or custom unequal flow ratio available.

FAQ

Q1: What is the advantage of cast iron housing compared with aluminum housing flow divider?

A: Cast iron housing has higher rigidity, less deformation under high pressure up to 280bar. Better vibration‑damping and shock‑resistance performance, lower noise at low speed. It is compatible with water‑glycol fire‑resistant hydraulic fluid, no electrochemical corrosion problem. Especially suitable for multi‑section models (4/6/8/12 sections), heavy‑load, mining, metallurgy, bridge jacking conditions. Aluminum version is lighter but not suitable for severe shock and water‑glycol medium.

Q2: What synchronization accuracy can you reach?

A: Standard sync accuracy is ±1.5%~±2.5% under ideal working condition. Actual onsite accuracy will be affected by flow rate, pressure, oil cleanliness. Installing relief & make‑up check valves will improve real‑world synchronizing performance.

Hot Tags: high quality 6 groups gear flow divider, China, manufacturers, suppliers, price